Patrick,
thank you for your help, now I installed pciutils which is what I
couldn't find so misdn-init works!!!!
Unfortunately aftere a misdn-init start I get invalide module format errors.
I search on internet hoping to solve it.
Thanks again!
Giorgio Incantalupo
Patrick wrote:
On Mon, 2006-08-28 at 09:08 +0200, Giorgio Incantalupo wrote:
Hi Patrick,
thanks for your answer.
Unfortunately I cannot use misdn-init command because my distro has not
the lspci command misdn-init is based on. That's why I want to bypass
it. I'm doing all this mess because Debian Sarge installer does not work
with new asus motherboards, so I'm trying to use the "testing Etch" version.
I tryed "monoBRI" as parameter but I do not know if it is the right
choice for a monoBRI card.
Why not use a distro that supports your motherboard? Why not just
install pciutils manually on your box so you have lspci and the
misdn-init script can do its job? Anyway, I don't know what card you
have and even if I did I would not know what module it should use and
even if I did I would not know what layermask en other misdn parameters
to specify because that's what misdn-init scan figures out for me...
Regards,
Patrick
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
____________________________________________________________________
GIORGIO INCANTALUPO
Tel. +39 02 9350 4780 (104)
FG&A Software
20017 Rho - Via Puccini, 8
E-Mail :
[EMAIL PROTECTED]
Internet:
http://www.fgasoftware.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
