Hello, question is can we use today's * MGCP function for trunk routing instead of the MGCP client.
e.g. exten => _X.,1,Dial,MGCP/[EMAIL PROTECTED] where other-sfotSwtich-ip is the IP address of another softSwitch, which support MGCP protocol. Please advise. Thanks, George -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Roy Sigurd Karlsbakk Sent: Friday, November 07, 2003 6:09 AM To: Asterisk Users Subject: Re: [Asterisk-Users] MGCP - Repost If you mean to use MGCP clients and an E1/PRI to the telco with asterisk as the 'origo', that's what I do, so yes. On Fri, 2003-11-07 at 14:24, Lal, Deepak (Contractor) wrote: > I did not get any answers to my earlier posting. I hope I have better luck this > time- The question: Is it possible to use Asterisk as media gateway controller? > I know * supports MGCP, but does that also imply that I can use * to control any > third party media gateway (such as one providing media conversion from E1 to > AAL2). - DL > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
