OK, changed the register interval for the Linksys PAP2T to 10 times
longer and the output described earlier on the CLI also appears to
follow the same schedule.
I guess I'll have to check a Linksys list to see what could be
causing this and if I should expect things to get worse.
On Aug 29, 2006, at 8:21 PM, Carlos Leal wrote:
I'm wondering if anyone can tell me what the following output,
repeated about once per minute on my verbose=5 CLI >, means.
-- Contact header: transport
-- Contact header: q
-- Contact header: transport
-- Contact header: q
I'm on the latest version, 1.2.11, and am recovering from a too-
near lighting strike that caused damage here and there. Asterisk is
back up, minus a clone FXO card that the phone company said was
causing a short in the phone line. SIP and IAX lines seem to work
normally again except for this message that pops up about once a
minute.
Could it be a PAP2T that refreshes registration every 60 seconds?
If so, what's changed?
Thanks._______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
