If "pstn call ring thru line 1" is enabled, all incoming pstn calls will
ring through to the fxs port (and not to asterisk). The OP was looking
for a auto fail over function that essentially would be "pstn call ring
thru line 1 on sip failure". That doesn't exist.
Bob Chiodini wrote:
Probably the PSTN Call Ring Thru Line 1 feature. Section 4.11 in:
http://www.sipura.com/Documents/SipuraSPAUserGuidev2.0.9.pdf#search=%22spa3000%20manual%22
By default, if my asterisk went down after the SPA3000 was already
registered, the in-bound PSTN call was lost. I probably did not wait
long enough and I did not have "PSTN Call Ring Thru Line 1" enabled.
Bob...
On Fri, 2006-09-01 at 10:32 -0400, Kevin Collins wrote:
My 3000 does this natively without config.
Kevin Collins
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Kennedy
Sent: Friday, September 01, 2006 10:03 AM
To: [email protected]
Subject: Re: [asterisk-users] Sipura SPA3000
On Fri, Sep 01, 2006 at 08:11:50AM -0500, Rich Adamson wrote:
I have a question on configuration of SPA3000 with asterisk.
1. I want all incoming calls are redirected from SPA3000 to my
asterisk server.
2. Asterisk then should direct this call to my SIP phones (including
Sipura)
3. In case asterisk server is down I want that call be directed
straight to the handset connected to the Sipura Is this
configuration possible?
The spa3000 does not have logic in it to support #3.
I thought the SPA3K could do this, i.e. on power failure or non-ability to
connect to server, connect FXS to FXO.
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
