or get really radical:
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -F
Bob Chiodini wrote:
I think all anywhere should allow 5060. Try running service iptables
stop (as root) to shutdown the firewall. See if 5060 then answers.
I'm not running a firewall on my asterisk box so I'm not sure what the
rule would need to be. service iptables start will restore the firewall.
Bob...
Elpidio Ramos wrote:
Bob,
I get the same answer you get when using netstat -an
When I query the firewall rules I get this:
Chain RH-Firewall-1-INPUT (2 references)
target prot opt source destination ACCEPT
all -- anywhere anywhere ACCEPT icmp --
anywhere anywhere icmp any
ACCEPT ipv6-crypt-- anywhere anywhere
ACCEPT ipv6-auth-- anywhere anywhere
ACCEPT udp -- anywhere 224.0.0.251 udp dpt:5353
ACCEPT udp -- anywhere anywhere udp dpt:ipp
ACCEPT all -- anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT tcp -- anywhere anywhere state NEW
tcp dpt:ssh
ACCEPT tcp -- anywhere anywhere state NEW
tcp dpt:http
REJECT all -- anywhere anywhere
reject-with icmp-host-prohibited
I assume this indicates port 5060 is restricted?
Elpidio
*/Bob Chiodini <[EMAIL PROTECTED]>/* wrote:
Elpidio,
Is it truly not listening or is maybe a firewall blocking port 5060.
What does netstat -an | grep 5060 tell you? I get this:
netstat -an | grep 5060
udp 0 0 0.0.0.0:5060 0.0.0.0:*
iptables -L will list any firewall restrictions.
Bob...
On Fri, 2006-09-01 at 09:12 -0700, Elpidio Ramos wrote:
> Does anyone knows what could be the cause for asterisk not
listening
> in post 5060 if SIP interfaces is loaded with no problems?
>
> I am using Fedora Core 3.
>
> I have followed the instructions in several tutorials and tried
> several soft phones and the SIP interface seem to be dead.
>
> 1. When loading asterisk SIP load with no problem
> 2. When I activate the DEBUG for a peer, ip or sip in general, I
don't
> get to see any messages when a connection is attempted from any
soft
> phone.
> 3. The soft phones all report a timeout when trying to register.
> 4. Tried also to move to port 80 that I know is open but still the
> same problem.
>
> I will appreciate any help anyone can provide with this problem.
>
> Elpidio
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
*Elpidio Ramos*
President RM International Services SA CV
Web: http://www.ramosoft.com
Mex: +52 (55) 5116-9804 Office
+52 (55) 5116-9805 Fax
+52 (55) 1755-6601 Cell
USA: +1 (801) 494-1415 Office
+1 (240) 250-8264 Fax
+1 (801) 938-4740 Direct
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
One day at a time, one second if that's what it takes
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
