Hi Tim,
The dial plan trick worked great. Added |40[01]x| to my plan and 4000-4019
connect instantly from the PAP2 :) Added it to my X-Lite as well, and
worked there too.
Thanks!
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.
On Sat, 2 Sep 2006, Tim St. Pierre wrote:
You have to set in in the PAP2. When using SIP, it has to send an invite with
the number it wants to be connected to. The Sipura has to know a complete
number to send - it can't send it in pieces. You need to make the dialplan
in the Sipura match what you have programmed in Asterisk.
Ie. My extensions are 51XX, and 52XX, so in the Sipura dialplan, I added
5[12]XX - this will match any of my extensions, and complete the call. This
can be a problem if you use direct 10 digit dialing, and dial to an area code
beginning with 51 or 52. You could get around this (if it's a likely issue)
by prefixing a 9 to the 10 digit patterns, or inserting a . (I think) to make
it wait for another digit.
-Tim
On September 2, 2006 20:43, Nick Ellson wrote:
Hey Bob,
Just tested the PAP2, yes a # sends right away.
I am looking for why, still new at the dial plan stuff.. this is the
default.. Should I be looking for a way to have the PAP2 NOT deal with
dialing and let Asterisk handle it?
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
--
Tim St. Pierre
IP telephony specialist
sip://[EMAIL PROTECTED]
Toronto: 647 722 6930
Toll-Free 1 888 488 6940
[EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
