Hi Michael,
I tried what you had said and then tried calling you, and it worked. Then
I called my brother and while I did not get the error, I still got the
"busy" message i was getting before I borked my config trying too many
ideas ;)
So, any other 6 digit FWD users willing to take a call from me? Just so I
can eliminate the call string?
My two back to back calls..
*CLI>
-- Executing SetCallerID("SIP/4003-508e", "Nick Ellson") in new stack
-- Executing Dial("SIP/4003-508e",
"IAX2/776754:<snip>@iax2.fwdnet.net/<5 digits>|60|r") in new stack
-- Called 776754:<snip>@iax2.fwdnet.net/<5 digits>
-- Call accepted by 192.246.69.186 (format ulaw)
-- Format for call is ulaw
-- IAX2/192.246.69.186:4569-2 answered SIP/4003-508e
-- Hungup 'IAX2/192.246.69.186:4569-2'
== Spawn extension (default, 393<5 digits>, 2) exited non-zero on
'SIP/4003-508e'
-- Executing SetCallerID("SIP/4003-5d5e", "Nick Ellson") in new stack
-- Executing Dial("SIP/4003-5d5e",
"IAX2/776754:<snip>@iax2.fwdnet.net/<6 digits>|60|r") in new stack
-- Called 776754:<snip>@iax2.fwdnet.net/<6 digits>
-- Call accepted by 192.246.69.186 (format ulaw)
-- Format for call is ulaw
-- IAX2/192.246.69.186:4569-3 is busy
-- Hungup 'IAX2/192.246.69.186:4569-3'
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing Congestion("SIP/4003-5d5e", "") in new stack
== Spawn extension (default, 393<6 digits>, 3) exited non-zero on
'SIP/4003-5d5e'
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.
On Mon, 4 Sep 2006, Michael Graves wrote:
Nick,
Now I remember why this doesn't work. It's the caller ID settings. The syntax
you use is older and makes two separate calls
exten => _393.,1,SetCIDNum(${FWDNUMBER})
exten => _393.,2,SetCallerID,${FWDCIDNAME}
This won't work for some reason. As soon as I changed my settings to:
exten => _393.,1,SetCallerID,${FWDCIDNAME}
exten => _393.,2,Dial(IAX2/54245:[EMAIL PROTECTED]/${EXTEN:3},60)
exten => _393.,3,Congestion
Then it worked. The SetCIDNum function broke it. I can't say why, only that I
inquired with folk at FWD who told me that it was most definitely at my end.
Feel free to call my fwd number. It rings at my desk. If I'm there I answer but
you may just get VM.
Michael
On Mon, 4 Sep 2006 16:06:42 -0700 (PDT), Nick Ellson wrote:
I thought maybe my configs would have been a good idea to post:
iax.conf:
[general]
bindport=4569
bindaddr=10.0.0.20
bandwidth=medium
disallow=lpc10
allow=gsm
jitterbuffer=no
forcejitterbuffer=no
register => 776754:<snipped>@iax2.fwdnet.net
allow=ulaw
tos=lowdelay
autokill=yes
[iaxfwd]
type=user
context=fromiaxfwd
auth=rsa
inkeys=freeworlddialup
Extensions.conf
[globals]
FWDNUMBER=776754
FWDCIDNAME=Nick Ellson
FWDPASSWORD=<snipped>
FWDRINGS=SIP/4003
FWDVMBOX=4003
[default]
include => mainmenu
exten => _393.,1,SetCIDNum(${FWDNUMBER})
exten => _393.,2,SetCallerID,${FWDCIDNAME}
exten => _393.,3,Dial(IAX2/${FWDNUMBER}:[EMAIL PROTECTED]/${EXTEN:3},60,r)
exten => _393.,4,Congestion
[fromiaxfwd]
exten => ${FWDNUMBER},1,Dial(${FWDRINGS},20,r)
exten => ${FWDNUMBER},2,Voicemail,u${FWDVMBOX}
exten => ${FWDNUMBER},102,Voicemail,b${FWDVMBOX}
-------------------------------------
And I am not sure if something changed but now I get:
-- Executing SetCIDNum("SIP/4003-4dcc", "776754") in new stack
-- Executing SetCallerID("SIP/4003-4dcc", "Nick Ellson") in new stack
-- Executing Dial("SIP/4003-4dcc", "IAX2/776754:[EMAIL
PROTECTED]/XXXXXX|60|r") in new stack
-- Called 776754:[EMAIL PROTECTED]/XXXXXX
-- IAX2/fwd-gw-5 is circuit-busy
Sep 4 15:47:54 WARNING[28513]: chan_iax2.c:7013 socket_read: Call rejected by
192.246.69.186: No authority found
Sep 4 15:47:54 NOTICE[28513]: chan_iax2.c:1601 iax2_destroy: Avoiding IAX
destroy deadlock
-- Hungup 'IAX2/fwd-gw-5'
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Congestion("SIP/4003-4dcc", "") in new stack
== Spawn extension (default, 393XXXXXX, 4) exited non-zero on
'SIP/4003-4dcc'
The "No Authority found" I think is new? I am going to figure out how to
increase the logging, but does anyone see an obviuos boo-boo?
Nick
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.
On Mon, 4 Sep 2006, Michael Graves wrote:
I had similar troubleat first. Try not specifying CID. As I recall FWD is
sensitive to this.
Michael
On Sun, 3 Sep 2006 22:26:35 -0700 (PDT), Nick Ellson wrote:
Hi all,
I have been researching a dialing problem I am having with FWD. I followed
their IAX2 config notes, and I can receive calls from my brother from FWD,
and all the echo tests, call me services work. But I cannot call him.
-- Executing SetCallerID("SIP/4003-9de6", ""Nick Ellson"") in new
stack
-- Executing Dial("SIP/4003-9de6",
"IAX2/776754:<scrubbed>@iax2.fwdnet.net/<snipped>|60|r") in new stack
-- Called 776754:<scrubbed>@iax2.fwdnet.net/<snipped>
-- Call accepted by 192.246.69.186 (format ulaw)
-- Format for call is ulaw
-- IAX2/192.246.69.186:4569-2 is busy
-- Hungup 'IAX2/192.246.69.186:4569-2'
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing Congestion("SIP/4003-9de6", "") in new stack
== Spawn extension (default, 393<number snipped>, 3) exited non-zero on
'SIP/4003-9de6'
This is pretty much just what a few others from the FWD forums have posted
with no real response.
Has any one of you also had this problem with FWD?
Nick
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
