I use rtcachefriends=yes and any changes I make in my database become effective immediately along with also getting the MWI functionality. Even though what you say makes sense. Go figure!
Ben, yeah if it shows it's loaded then it's there for sure. Sorry I asked for it as in your module listing there wasn't any of these modules. I'm at the end of the rope on troubleshooting your issue. Maybe more detail is needed. Esp when you're saying that your sip.conf general section has just two entries. Where's the rest of it, not that a lot needs to necessarily be there if you're not doing anything too tricky. But I would go with removing the rtcache command from the sip.conf file and try and get realtime working in realtime, if that doesn't sound too whacked, just in case it's working off of some cached data, which is why your old codec selection seems to still work even after you change it. Have you looked in your asterisk log file (full) to see if its complaining about errors when you do a realtime load command? The only time my realtime load comes back empty is when it's got a permission problem of some sort on the DB side and one time it happened because of some delay that was introduced coz of some heavy logging or something, don't quite remember it. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
