Hi everyone, I'm new on Asterisk. I'm trying to follow a few tutorials on the net, and fortunately this has been the only stumbling block so far.
I do: modprobe zaptel modprobe wcfxs modprobe wcfxs modprobe wcfxs modprobe wcfxo I have this on zapata.conf: [channels] busydetect=1 busycount=7 relaxdtmf=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 pickupgroup=1-4 immediate=no context=hemac signalling=fxo_s callerid=asreceived channel=1 channel=2 channel=3 group=2 callerid="Batman"<123> signalling=fxs_ks channel=4 After I run ztcfg -vv I get this: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) 4 channels configured. Changing signalling on channel 4 from Unused to FXO Kewlstart ZT_CHANCONFIG failed on channel 4: Invalid argument (22) Strange this is that if I change the signalling on the first three channels (or the 4th for that matter), the same message appears, so I'm wondering if it's picking up the changes in the configuration... or is there something I'm not getting? Kind regards, Ivan V. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
