That would be problematic. I am using a cheap Linksys router where my Polycom 501 is located and I see no such setting. It probably is hardcoded.
Can I force the Polycom 501 to send empty RTP packet? (actually, I tried using comfort noise but I got an asterisk error message rtp.c:330 process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: xx.xxx.xxx.xx Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dr. Michael J. Chudobiak Sent: September 7, 2006 1:39 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Re: Asterisk hangs up after 10-15 minutes whenSIPPhone is on mute Mike wrote: > Thanks Tony. Its possible that the phone stops sending RTP stream > (but it certainly is receiving some!). How do I get Asterisk to stop > caring whether it receives RTP or not? > > Yes there is a NAT between the phone the the Internet. The Asterisk > server doesn't have NAT though. My Sonicwall NAT/firewall has a 15 minute default inactivity timeout for TCP NAT connections, which is suggestive (it can be increased, though). If the signaling vanishes in one direction, maybe your NAT device is "forgetting" about the connection. - Mike _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
