> I would like to setup asterisk via a dedicated satellite link with > latencies > of 700ms -1000ms I am having problems adjusting the jitter buffer and > would > like to find out if anyone has iax configs for a similar setting I am > using > g729 codec .I can communicate but just having issues with sound clarity I > can hear the person on the other end but would like to fine tune it for > the > best possible results my iax conf is as follows on both ends. > > iax.conf > > [general] > bindport = 4569 ; Port to bind to (IAX is 4569) > bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) > disallow=all > allow=g729 > allow=ilbc > allow=ulaw > allow=alaw > allow=gsm > mailboxdetail=yes > > bandwidth=low > jitterbuffer=yes > dropcount=4 > maxjitterbuffer=450 > maxexcessbuffer=80 > jittershrinkrate=1 > trunktimestamps=yes > trunkfreq=50 > tos=lowdelay > > Regards > Brian >
Hi, what version of Asterisk are you using. From your configs, it looks like you using the old jitterbuffer. You might have better results with the 'new' jitterbuffer (it has PLC). iax.conf says which jitterbuffer settings applies to the 'new' or 'old'. Try the new settings. Here is one I have (the 'new'): Asterisk 1.2.6 ;jitterbuffer=yes ;forcejitterbuffer=yes ;maxjitterbuffer=300 ;maxjitterinterps=300 ;resyncthreshold=1500 ;trunktimestamps=yes thanks, yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
