I am trying to connect a Definity G3 to an asterisk system. I had it
working OK with the exception of the caller ID on the Definity handsets
just showing the trunk-group name, this was using Switchvox. Prior to
that, I used Trixbox and caller ID was fine on the phones. Just to make
sure that the problem was actually with the Switchvox and not the
configs in the Definity I set up another PRI link to connect to a
Trixbox system.
I created another ISDN Processor Channel and other configs to make a
separate ISDN T1 connection. It worked as far as the D channels come up
(and go down over and over) on the circuits but no B channels.
I later read that you can only have one ISDN entry in the processor
channel assignment.
When I try to remove the second (or even modify the first entry) I get
"identifier not assigned"
I have busied out everything relating to the signalling and data but
still get "identifier not assigned" when I remove the entry from the
Communication-interface Processor-channels form.
it is just two lines.
1 isdn 1 h
2 isdn 2 h
I cannot remove or change anything. If I press enter, it accepts the
command with no changes.
If I try to remove the data-module, it says I must first remove the
communication link. If I try to remove the link, it says I have to
remove the communication processor. As stated above, I cannot remove
the processor so I am stuck.
I do not have any contract with Avaya. Do they do hourly or per
incident work? If so, how do I go about initiating a trouble ticket?
The other option I was considering is to reset the box back to factory
defaults. This was once a huge system but now there are only about 25
active stations, three trunk groups, and 15 POTS lines.
I would need a listing of how they are all setup such as
extensions/ports and buttons mappings, and I am still not sure there is
a factory reset option.
I cannot remove the DS1s or make the Definity-> Asterisk work until I
can remove it.
Please help, this was a production system!!!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
