You should never have callerid="xxyyzz" as some devices (as you just
discovered) choke on the " since that is not a valid Caller*ID
character. I think some versions of the Cisco phone SIP firmware also
has a similar problem.
George Pajari wrote:
Just a short problem description/resolution so others do not have to
experience the same frustration and lost hours.
Set Up: Sipura devices (various, mostly SPA2100, SPA2102) connecting to
an Asterisk box (1.2.4). Asterisk box talks to a Patton SmartNode SN2400
SIP/PRI gateway.
Inbound calls work fine.
Outbound calls work fine from some units, not others.
Problem: if sip.conf contains callerid=xxyyzz it works; if it contains
callerid="xxyyzz" then the SN2400 accepts the SIP INVITE but refuses to
handle it.
Do not have the patience, time, or inclination to run more SIP debugs to
see exactly what is happening -- just posting this in the hope it might
help someone somewhere.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
