Just tried it. When I run "sip show channels" it doesnt show any open
channels.
Thanks,
Frederik
On 14 Sep 2006, at 03:27, Bill Gibbs wrote:
Make those calls then check the CLI "sip show channels" and see if the
channels are stay up
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frederik
Fix
Sent: Wednesday, September 13, 2006 8:35 PM
To: [email protected]
Subject: [asterisk-users] QuadBRI and Zyxel Wifi phone stop working
togetherafter 3 calls
Hi,
I have a strange problem that I have no idea how to debug:
I have a Zyxel Prestige 2000W Wifi telephone that is connected to my
Asterisk server which has a Junghanns.net QuadBRI card. I can make
exactly 3 calls to the "outside" over the QuadBRI. Any calls after
that fail with the log saying that all lines are busy.
Turning the phone off and on solves the problem and I can make 3
calls again before it repeats. This problem does not occur when I
make calls from my Cisco 7960G phones using SCCP or using eyebeam and
SIP. Also making calls from the Zyxel through a cheap Cologne chipset
ISDN card using zaphfc does not show this problem.
I am using the following versions:
Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1r
Zyxel Prestige 2000W (version 1)
Zyxel-Firmware: Wj.00.11
Any help is very much appreciated,
Frederik
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
