I have 2 single BRI s0 cards. -1 in TE mode for the outside line -1 in NT mode for the inside phones
If I dial the group with "Dial(Zap/g2/,60,t)" then all MSN's on all phones ring. But how do I dial so only MSN 10,11,12 rings? If I dial every number as "Dial(Zap/g2/10&Zap/g2/11&Zap/g2/12,60,t)" then only 10 and 11 rings on separate b-channels and 12 is busy/congested. I know it can be done, cause my hardware PBX (Elmeg 46e) can do it using only 1 b-channel or through the d-channel. Best regards, Henrik Woffinden Kai Ober wrote: > is it a single s0 card? > how do you ring the 3 phones? > > no problems with the installation of mISDN so far. > > it is as easy as on Bristuff > > > regards > KAI > > > Henrik Woffinden schrieb: >> Hi >> >> Sorry... I haven't been specific enough... >> >> I have several ISDN phones on my "inside" NT mode ISDN card, and I wan't >> 3 of the MSN (local) numbers to ring at the same time. I can't get more >> than 2 phones to ring at the same time, unless I ring them all by >> dialing the group, but that's not what I want. >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
