Start up a sip debug ip x.x.x.x (x=ip address of the device) and see if it is trying to register. You should be able to tell from that if you need to mess with the NAT settings. If nothing is coming in at all, it sounds like a networking issue.
bp
On 9/19/06, Allan Kamau <[EMAIL PROTECTED]> wrote:
I don't see a "-- Saved useragent ...." line for the
SPA 3102 device am trying to connect to Asterisk.
I have similar configuration for the SPA 3102 as I
have for another hard phone in the sip.conf file but
the device (SPA 3102) does not even attempt to
register.
I have configured the device to register with the sip
proxy 192.168.0.2 but nothing happens.
Using sip show peers at the CLI this is what I see.
sip show peers
Name/username Host Dyn Nat ACL
Port Status
2001/2001 192.168.0.11 D
5060 Unmonitored
2006/2006 192.168.0.100 D
5060 Unmonitored
myAGI-app/myagi_app 192.168.0.10
5060 Unmonitored
2008/2008 (Unspecified) D
0 Unmonitored
4 sip peers [4 online , 0 offline]
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
