-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday 10 November 2003 15:31, Eric Wieling wrote: > > I now have an E100P, an (possibly defective) E400P and two TE410P cards. > > Only the E100P works flawlessly. The E400P doesn't work with the newest > > zaptel driver and the one TE410P card I've tested apparently has some > > serious IRQ issues as shown below. > Try a different motherboard. More than a few people have solved their > problems by switching to a different motherboard. If you are having > problems with the ZapTel cards sharing IRQs then try enabling APIC on > UniProcessor machines (it's a config option when building the kernel)
It's an SMP kernel on a Xeon (ht enabled) box. APIC is enabled. All the cards have been tested on the exact same hardware configuration. I have no other motherboards available as our serverpark is based on the same hardware all the way. But this is not the issue here. I've already contacted Digium about the irq issue and the E400P issue. - -- Regards, Tais M. Hansen ComX Networks Tel: +45-70257474 Fax: +45-70257374 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/r63X2TEAILET3McRAkUiAJ9lTOCx7YY1+HKgRrkQhtL783zurACfUgqf aberbG6XC74n/Vqby8Islm0= =mAqa -----END PGP SIGNATURE----- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
