On 200906, 16:00, Forrest Beck wrote: > > I am looking to see if anyone has a dial plan setup to use a secondary > PRI. We have two campuses, each with it's own PRI (for telco going to > a single span digium card) and a 10MB fiber link between the two for > data. All calls are transfered between the two campuses via the 10MB > data line and outgoing calls are made on the campus'es PRI. I am > loking to see if there is a way to tell the server if one PRI is full > (all 23 channels are in use) or not available to try routing the call > through the other campus and it's PRI. Anyone doing this already? I > am not sure how to have asterisk check to see if a PRI is down for > making the call. I guess I could just add the call route to the other > campus just below the my default call route. So if the primary call > route fails, it will just go to the next line being the other campus.
I would try using TDMoE, and duplicating the PRIs over the two machines,
so that:
Machine 1 handles PRI A and has B as, say group2
Machine 2 handles PRI B and has A as, say group2
I don't know if you can run TDMoE over your fiber connection, but I was
just here for a suggestion.
Ciao
--
Massimiliano Stucchi, CTO & Director of Operations
WillyStudios.com - IT Consulting, Web and VoIP Services
[EMAIL PROTECTED] | Tel (+39) 0244417203 | Fax (+39) 0244417204
IT-20040, Carnate (Milano), via Carducci 9
pgpN6fNquah6L.pgp
Description: PGP signature
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
