How would I go
about setting the TOS bit to "RTP IP TOS Byte: 18 (hex)" for SIP and IAX traffic at the asterisk
server?
Also,
IP Type of Service
RTP IP TOS Byte: 18 (hex)
Silence Suppression
Mute Mode: On, UDP keep-alive every 10 seconds
G.711 Voice Activity Detection: Off
Codec Preferences
G.711u: 1 (Highest priority)
G.711a: 2
Do you have a quick
reference on how to configure a Cisco switch to prioritize SIP
traffic?
I check in various
Cisco docs, and there are so many references, and none of them seem to relate
directly to using the TOS bit for QOS.
I am looking into using the TOS bit because that is the only
method that my SIP devices use. (Citel Handset
Gateway)
ref:
QOS settings from Citel Handset
Gateway:
Handset Gateway - QoS
Configuration
IP Type of Service
RTP IP TOS Byte: 18 (hex)
Silence Suppression
Mute Mode: On, UDP keep-alive every 10 seconds
G.711 Voice Activity Detection: Off
Codec Preferences
G.711u: 1 (Highest priority)
G.711a: 2
Thank You,
Steven
BerkHolz
- MCSA
- MCSE -
Manager of Information Systems
TESCO Group
Companies
Fax. 248-836-5101
www.TESCOGroup.com
Board member
of
www.glimasoutheast.org
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
