Paul Hales wrote:
I am setting up an E1 crossover system for a customer, with a Siemens
Hipath Officecom 150 system.
And it's not working - I get a red alarm from the outside world, and a
yellow from the PABX.
What's your zaptel.conf?
My suggestion:
a. Do one step at a time.
b. Asterisk - PBX: use a cross-cable. You probably need to enable CRC on
the span. You need to take timing from the span connected to the telco.
c. Asterisk - PSTN: should be straight cable. You need to take timing
from the PSTN. Red alarm means not connected.
Hope this helps.
Leo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
