K Y Iyer wrote:
Hi
Looking at using Asterisk for a new remote office with about 200
extensions. We have an existing EPABX in our central office with about
120 POTS lines.
The central office and the new office will be connected over a 4Mbps
leased line.
We want to be able to connect our Asterisk box to our EPABX so that
people with Asterisk VoIP extensions can dial out using the POTS line -
and, of course, receive calls through the POTS line.
I am informed that we will require a Digium card to connect the Asterisk
box to the existing EPABX. This card, I am told is a PRI card that can
handle 30 voice channels. This is fine.
My question is - how many such cards can one Asterisk system handle?
What if I want to enable three PRI lines on Asterisk? Is it recommended
to put in three or four PRI cards in one Asterisk box?
I have a dual Xeon 3.0Ghz (I think!) box with 2GB RAM - this box can be
upgraded or changed as well and am running RHEL 4.0 AS on it.
Thanks very much
Best wishes
Iyer
Hi,
PRI cards come in 1/2/4 ports, so just 1 card will be enough to manage three
PRI lines.
Also look at Sangoma cards, they have PRI carda also.
--
thanks,
yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
