You can also change some settings in the zapta and zaptel
config.. to reduce
echo and interference on the line..
This is the most important thing here - what does your zapata.conf look
like?
zapta.comf
switchtype=national
This is not necessary in your case. It pertains to PRI lines, and not
the POTS lines you have.
echocancel=yes
echotraining=yes
echocancelwhenbridged=yes
You may want to turn each of these off, in turn, for testing,
especially the "echocancewhenbridged".
You can also tune the "echocancel" setting in terms of taps (a tap is
one sample from the data stream per second). You can use the values:
16, 32, 64, 128, or 256 ('yes' just means 128).
- Noah
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
