I am not sure what I might be set up wrong, but dialing out with my Zap/1
port seems to alwyas get the "You must first dial a 1 when calling this
number" message from what sounds like the actual PSTN. My zapatel.conf and
extensions.conf bits below. Any advice? (I do receive inbound calls, and
it does sound like I am getting the PSTN error. I do notice that when I
get an inbound call, I have 5 secs of sevear static before it suddenly
becomes clear.. could that be happening on the outboud as well munging the
first few digits?)
signalling=fxs_ks
language=us
context=inbound_qwest
sendcalleridafter=2
callerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
channel=>1
exten => _9.,1,Dial(Zap/1/${EXTEN:1},60)
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
