I am using the TE110P with the Intel 945P chipset, and I don't have any issues with compatibility. The 945P chipset is a very common chipset for the D and 4 processor.
Works quite well. On 10/10/06, R.R. Libera <[EMAIL PROTECTED]> wrote:
I´m about to acquire an E1 interface. I was reading about TE110P and hardware incompatibilities issues with some boards, servers and chipsets. I also read a lot of compliments about Sangoma Hardware (specially for E1/T1 interfaces) and I was wondering if A101 from Sagoma is a better choice (technically speaking) than Digium TE110P. I read now, on this post, an opinion about Sangoma interfaces and echo cancellation issues.. I have a PC with Asus P5LD2 board (Intel 945P chipset). I asked Digium support for how compatible is the TE110P with my box.. and they said that no incompatibility issues had been reported with the chipset I use.. BUT, they had no test TE110P with this chipset... I´m not a Sangoma or Digium fan... I´m just a newbie who don´t want to get the wrong piece of hardware. I really appreciate any advice from people with a lot of experience and skills on this topic. Thanks in advance R.R. Libera Dovid B escribió: > I have never used T1 cards but as far as POTS line cards I would say > that I like sangoma better. It is a little bit harder to set up but > works wonders. > ----- Original Message ----- From: "Thomas Kenyon" > <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <[email protected]> > Sent: Tuesday, October 10, 2006 12:31 PM > Subject: Re: [asterisk-users] Echo Cancel Cards > > >> Joseph wrote: >>> On Mon, 2006-10-09 at 20:41 -0400, Forrest Beck wrote: >>>> Anyone using the echo cancelation cards from digium? We are using the >>>> single span T1 card with out echo cancel and I was curious if it was >>>> worth the money. >>> >>> I'm running Asterisk 1.0.11 with few Sipura 3000/2000 units and have no >>> echo whatsoever. I just tried new Asterisk 1.2.12.1 and the first >>> thing I've noticed was >>> terrible echo, not to mentioned that it keep crashing constantly to a >>> point this that is not possible to use it. >> I've got an SPA-3000 at home that is constantly crashing, echoey and >> is almost unusable. (The CS4660-based ATA and PA1688-based handsets >> have otherwise been fine, as were the the Cisco 468 and Linysys PAP2 >> when they were in use). >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
