Steve Totaro wrote:
I have NFAS setup on several quad port T1 cards (Sangoma).
It mostly works well with the exception that calls coming in on channels
48,72, and 96 have no audio. I tried removing these channels from
zapata.conf with hopes that the channels would not come up or be used.
Now I get "Ring requested on unconfigured channel".
How can I busyout these these channels so that incoming calls are not
sent to them, or how can I fix the real problem? I think it may be a
Sangoma/Wanpipe configuration issue.
Thanks,
Steve Totaro
Steve,
I take it you have one D channel for all four spans? On 24? I think
this should be pretty transparent to wanpipe. You should configure four
spans, with one channel group (type TDM) per span (obvious). You should
also probably disable any "native D channel" features. I always have
nothing but problems with that. In zaptel.conf, only specify one d
channel. The "tricky" stuff is in zapata.conf. Can you post that, and
maybe zaptel.conf too?
--
Kristian Kielhofner
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
