Has anyone else experienced a problem with the LED for span 1 on a TE410P or TE405P?
I had a TE410P on which the span 1 LED would not light red, but once the span was connected, it did correctly light green. I RMAed the board to our UK distrbutor and received a replacement. However, the replacement board displayed the same problem! Wondering if it was related to the computer I was putting it in, I removed the card again intending to put it in a different machine. As I did so, I happened to notice that one of the wires from the LED was touching the faceplate. Aha! I moved the wire, re-installed the card, and all was fine. If only I'd noticed this on the first card :-( See the following document for photos. http://www.softins.co.uk/TE410P%20LED%20Problem.pdf Perhaps Digium could alert their production company and support personnel to this problem. Cheers Tony -- Tony Mountifield Work: [EMAIL PROTECTED] - http://www.softins.co.uk Play: [EMAIL PROTECTED] - http://tony.mountifield.org _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
