Does your switch have quality input power?
Are the ethernet cables too long? I could be wrong but I think that the
signal loss in a long wire affects electricity transmission in a poor
way, but maybe that's only for weak signals when compared to the noise
level <shrug>
As an aside, the switch you mentioned claims it can output 15.4W per
port simultaneously, so the ~4.8W my Polycom 501 phone draws shouldn't
trigger its overcurrent protection.
Moj
Mike Garey wrote:
I've been noticing that my group of Polycom IP 501 phones seems to
randomly reset themselves nearly every night (I guess it usually
happens at night, since I've never seen it happen while I've been at
work during the day)..
When I say "reset", I mean, the hands free volume and ring volume are
set to the default and the call logs (received calls, missed calls,
placed calls) are all reset. It does, however, keep certain settings
such as the specific ring tone used for incoming calls.. But most
other settings are being reset.. Has anyone else experienced this, or
know why it might be happening? Thanks,
Mike
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:500,452fb14c87861504517840!
--
Mojo <[EMAIL PROTECTED]>
Office Manager, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
