Hello Again I ran the genzaptelconf - but I cannot see any channels in asterisk CLI.
I did make and install zaptel after I put in the card. What am I missing? Thanks very much, indeed, for all your assistance Best wishes Iyer [03 ~]# asterisk -r Asterisk 1.2.12.1, Copyright (C) 1999 - 2006 Digium, Inc. and others. Created by Mark Spencer <[EMAIL PROTECTED]> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'show license' for details. ======================================================================== = Connected to Asterisk 1.2.12.1 currently running on mysql-03 (pid = 23271) 03*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo default 03*CLI> zap show status Description Alarms IRQ bpviol CRC4 Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0 03*CLI> [03 ~]# ztcfg -vvv Zaptel Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 133-266 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear channel (Default) (Slaves: 07) Channel 08: Clear channel (Default) (Slaves: 08) Channel 09: Clear channel (Default) (Slaves: 09) Channel 10: Clear channel (Default) (Slaves: 10) Channel 11: Clear channel (Default) (Slaves: 11) Channel 12: Clear channel (Default) (Slaves: 12) Channel 13: Clear channel (Default) (Slaves: 13) Channel 14: Clear channel (Default) (Slaves: 14) Channel 15: Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Clear channel (Default) (Slaves: 17) Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: Clear channel (Default) (Slaves: 24) Channel 25: Clear channel (Default) (Slaves: 25) Channel 26: Clear channel (Default) (Slaves: 26) Channel 27: Clear channel (Default) (Slaves: 27) Channel 28: Clear channel (Default) (Slaves: 28) Channel 29: Clear channel (Default) (Slaves: 29) Channel 30: Clear channel (Default) (Slaves: 30) Channel 31: Clear channel (Default) (Slaves: 31) 31 channels configured. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tzafrir Cohen Sent: Wednesday, October 18, 2006 5:10 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Digium Single Span Card Installation On Wed, Oct 18, 2006 at 04:28:16PM +0530, K Y Iyer wrote: > Hi > > Also tried the following command and got the following lines. Why is > that /proc/zaptel/1 reports all the 31 lines whereas ztcfg reports 18 > channels? What do they mean? ztcfg reports the channels you are about to try to configure and the result of that configuration. It does not scan your system for channels. Your /etc/zaptel.conf does not include all the bchan-nnels, and thus not all of them are reported and not all were configured. <selfpromo> If you want to scan your system for channels and attempt to create a wonrking configuration (one that at least be able to pass ztcfg and run asterisk with), use xpp/utils/genzaptelconf. </selfpromo> -- Tzafrir Cohen sip:[EMAIL PROTECTED] icq#16849755 iax:[EMAIL PROTECTED] +972-50-7952406 jabber:[EMAIL PROTECTED] [EMAIL PROTECTED] http://www.xorcom.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
