Thanks once again,
Let me put is clear. I'm using TRIXBOX which many out here feel - its for kids- but i do like it an use it for sometime.
As all i do have extensions and trunks configured on it. I want one of my extensions to use a particular outbound route only. I have rightly done all the setup in the extensions_custom.conf. Hence i do want the 55 to be an identifier for his route hence the 55 will be sent from the PAP2 without the user knowing the setup itself.
Hope you got what i intend. I don't know if there is any other solution other than this as all user will be using the same number format to dial.
Thanks for the support.
Dan
On 20/10/06, Brian Candler <[EMAIL PROTECTED]> wrote:
On Fri, Oct 20, 2006 at 03:09:56PM +0300, [EMAIL PROTECTED] wrote:
> I have a Linksys PAP2-NA connectd to my asterisk. I would like the
> device to add 2 characters in front of the dialled number always when
> it send the call to my asterisk. I dont know how to do that. I will
> summarise my requirement.
> My friend dials 1-210-1234345, i want the asterisk to get
> 55-1-210-1234345.
What actual problem are you trying to solve?
It's very likely that you can solve it better in Asterisk without touching
the ATA.
For example, if what you actually want is for calls from the PAP2 which
Asterisk routes outwards via a POTS card to be prefixed with 55, you can do
that in your dialplan (extensions.conf) by modifying the rule for placing
outbound calls.
[internal]
exten => _1.,1,Dial(Zap/4/55${EXTEN})
^^^^^^^^^^
Brian.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
