Thanks.. Did I misread the posts? These look like the VWIC-1MFT-T1 is connecting to the PSTN and not connecting to a PRI card on an Asterisk box..
We are looking to do the following.. Asterisk PRI card -> VWIC-1MFT-T1 -> SIP -> Thanks David ----- Original Message ----- From: "Tijl Van den Broeck" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Wednesday, October 18, 2006 3:58 AM Subject: Re: [asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1 http://www.voip-info.org/wiki/index.php?page=Asterisk+cisco+FXO is a good read for that. I've got a couple of 2600's configured this way, and all seems to work just fine. One little detail I came across was one-way-audio.. strangely enough that was fixed if I used Dial(SIP/${EXTEN:[EMAIL PROTECTED],40,to) .. the "o" Dial-option fixed it in my dialplan, both for outgoing and incoming calls. SIP calls from the 2600 arrive in your asterisk in the form [EMAIL PROTECTED], my approach was to let it use default context, then match the numbers there with exten and send it off to the individual contexts from there with Gosub(). Good luck :-) On 10/18/06, David Edwards <[EMAIL PROTECTED]> wrote: > Steve, > > I was just looking for a little info to get me started.. > > Thanks > > David > ----- Original Message ----- > From: "Steve Blair" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <[email protected]> > Sent: Tuesday, October 17, 2006 19:24 > Subject: Re: [asterisk-users] Cisco 2621 NM-HDV VWIC-1MFT1 > > > > David: > > Do you have a specific problem with this card? If not and you are just > looking for general information you can try the following document. > > -Steve > > http://mit.edu/sip/sip.edu/ciscoGW.html > > > David Edwards wrote: > > > Hi all, > > > > We are trying to use a Cisco 2621 with NM-HDV & VWIC-1MFT1 to connect > > to a PBX via the PRI card. We want to use it as a gateway to forward > > all calls to a hosted Asterisk server off-site via SIP. > > > > Does any one have any suggestions on how to best approach this? > > > > Thanks > > > > David > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >--Bandwidth and Colocation provided by Easynews.com -- > > > >asterisk-users mailing list > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
