voicemailservice.gsm is "You've reached the voicemail system. If you have a voicemailbox on this system, press star. To leave a message for another customer enter their ten digit number now" however "customer" should be subscriber.
[voicemail-service]
exten => 4193016245,1,GoTo(voicemailaccess,1)
exten => voicemailaccess,1,MailboxExists(${CALLERID(num)})
exten => voicemailaccess,102,VoiceMailMain(${CALLERID(num)})
exten => voicemailaccess,2,Background(voicemailservice)
exten => voicemailaccess,3,Background(silence/10)
exten => voicemailaccess,4,GoTo(voicemailaccess,1)
exten => *,1,VoiceMailMain
exten => *,2,Hangup
exten => _1NXXNXXXXXX,1,VoiceMail(u${EXTEN:1})
exten => _NXXNXXXXXX,1,VoiceMail(u${EXTEN})
On 10/23/06, Joseph <[EMAIL PROTECTED]> wrote:
On Mon, 2006-10-23 at 17:59 -0400, Andrew Joakimsen wrote:
>
>
> On 10/23/06, Joseph < [EMAIL PROTECTED]> wrote:
> I just try with single authentication DISA, doesn't work,
> password is
> not recognized.
>
> Try without any disa whatsoever
I think DISA has to be there as it gives access to internal dial tone,
isn't it?
I can be without password,
[snip]
> Did you try exten => 1000,1,VoicemailMain() as I said above with
> NOTHING BETWEEN THE PARENTHASIS???
Thank you, Yes It Works! It works without parenthesis.
I was trying to make make it to work with one "voicemail" context but in
this case I will create another "voicemail_outside" context without
anything between parenthesis for outside access.
exten => 1000,1,VoicemailMain()
>
> In this case all internal callers can access their
> voicemailbox without
> password but when a call comes from an external source PSTN
> line it is
> asking for password and it goes through correctly:
> vm_execmain: Specified user 'pstn1270' not found (check
> voicemail.conf
> and/or realtime config). Falling back to authentication mode.
> (as the user "pstn1270" is not in voicemail.conf file)
> but without the "|s" somehow it is distorting the caller ID
> from
> "pstn1270" to
> 'tn127011' that is why it doesn't work, but I can not
> pin-point what is
> changing caller ID.
>
> You said the mailbox number is 11 and the caller ID Is correctly
> "pstn1270" and incorrectly "tn127011".... since the mailbox number is
> 11, I don't see how "fixing" (what does your CDR say??) this issue
> will fix your voicemail issue. Why do you insist on using the caller
> ID? Remember what you are trying to do, if user has to dial into the
> system from an outside phone their CALLER ID WILL NOT BE THEIR MAILBOX
> NUMBER.
As I've mentioned above I was trying to get by with one [voicemail]
context but I guess I'll have two.
>
> For the last time, try:
>
> exten => 1000,1,VoicemailMain()
>
>
> inside your disa-access context, and get rid of the old voicemail
> include statement. That will work, here is a detailed sequence of
> events
>
> Enter disa password, press #
>
> At the dial tone dial 1000
>
> System says "Comedian Mail. Mailbox?"
>
> You dail the mailbox number which you stated above is "11" So press
> the "1" key on your telephone, if you wish you can dial "#" after, if
> not just wait.
>
> System says "Password?"
>
> You dial the password, if you want you can press "#" after it, if not
> just wait
>
> I'm not going to respond to this thread any more. I've given you step
> by step EXACTLY what to do, anyone else would have gotten a USD 100 ++
> bill for that advice.
Thanks Andrew for your patience.
--
#Joseph
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
