Jorge
Don Pobanz wrote:
On Wednesday, November 12, 2003 3:47 PM, Tom Weeks [SMTP:[EMAIL PROTECTED] wrote:
Good day,
I am trying to setup an outbound dial plan which will time out if no answer. Using a X100P with the following dial command :
exten => 101,3,Dial(Zap/1/3036972357,5) ; try the desk line - fail to step 104
That is right, it does not time out and never will correctly since the X100P 'seizes' the line from the phone company immediately upon dialing so the X100P does not know whether the far end phone is ringing, is busy or if someone has answered. I believe it would take getting some type of digital interface (T1 or ISDN) in order to have far end answer supervision.
Don Pobanz
It dials out successfully, but never times out. I have a basicZapata
config :_______________________________________________
group = 1 context = RedRockWeb language = en signalling = fxs_ks usecallerid = yes hidecallerid = no echocancel = yes echocancelwhenbridged = no immediate = no channel => 1-2
Suggestions?
Thanks!
Tom
[EMAIL PROTECTED]
www.tellink-corp.com
303-697-2357
303-697-3103 fax << File: ATT00015.htm >>
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
