i'm having similar problems (if you find out the solution please post it)
did you try enabling 'callprogress' or 'busydetect' in zapata.conf ?
Maxi
2006/10/23, Arkaitz <[EMAIL PROTECTED]>:
Hi,
Im working with the following versions:
-asterisk-1.2.12.1
-zaptel-1.2.9.1
And with the following card:
00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Unknown device 8085:0003
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at c800 [size=256]
Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Identified as:
*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
Wildcard X101P Board 1 OK 0 0
0
And the following lines in zapata.conf(for spanish lines):
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
The problem is that although the calls work correctly the system is
unable to detect a pstn hangup and it keeps running even when the
other side is calling to another number(not an asterisk ones, asterisk
line keeps busy)
Any hint?
Thanks for your time
--
Arkaitz
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
