zttool is your friend here
red is LOS or no signal coming in
On Oct 26, 2006, at 3:54 AM, Florian Hars wrote:
I have a TE205P, jumpered for E1, added the missing wct4xxp-line
to /etc/modprobe.d/zaptel, zaptel.conf is just
span=1,1,0,ccs,hdb3,crc4,yellow
span=2,2,0,ccs,hdb3,crc4,yellow
bchan=1-15
dchan=16
bchan=17-31
bchan=32-46
dchan=47
bchan=48-62
Which, according to my reading of the documentation I could find,
should be correct. ztcfg doesn't complain about anything, yet all I
ever get is RED NOTOPEN for both spans, and the red blinking
pattern on the card changes from alternating to synchronous.
Am I missing something obvious? Did I install during the wrong
phase of the
moon?
And what exactly *is* the meaning of the RED alert? Hardware on
fire? Configuration Error? No Cable (this would be plausible, I
only want to connect it to the ISDN net once the configuration is
in a sensible state)?
Yours, Florian Hars.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
