More info.
[EMAIL PROTECTED] ~]# ztcfg -vvvvvv
Zaptel Configuration
======================
Channel map:
0 channels configured.
****************************
cat /etc/modprobe.conf
alias scsi_hostadapter ahci
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias eth0 e100
alias eth1 3c59x
alias wcfxs wctdm
install wctdm /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg
***********************
[EMAIL PROTECTED] ~]# cat /etc/asterisk/zaptel.conf
fxsls=1-4
loadzone=us
defaultzone=us
***********************
[EMAIL PROTECTED] ~]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
1 WCTDM/0/0
2 WCTDM/0/1
3 WCTDM/0/2
4 WCTDM/0/3
[EMAIL PROTECTED] ~]#
On 10/27/06, Erick Perez <[EMAIL PROTECTED]> wrote:
Hi,
Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo)
Steps:
modprobe zaptel
modprobe wctdm
ztcfg -vv
/etc/zaptel.conf
fxsls=1-4 # TDM04B
defaultzone=us
loadzone=us
/etc/asterisk/zapata.conf
signalling=fxs_ls
group=1
context=incoming
channel => 1-4
modprobe zaptel and wctdm load fine, however ztcfg -vv shows:
0 channels configured
Im using centos 4.4 with
Asterisk Version 1.2.13
Zaptel Version 1.2.10
Libpri Version 1.2.4
Physically looking at the card, the four FXO ports have the green led turned on.
It has no IRQ conflicts and zaptel compiled cleanly.
Kernel is 2.6.9-42ELsmp (it's a dual core Intel machine in an Intel 945G board)
Your comments are welcomed.
--
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
