Yes, you just need to setup asterisk with Digium board on the same server of your sipserver, and then you must establish a trunk between your sip server and asterisk.
Then you must route calls using asterisk dialplan as well as your sip server dialplan. Be aware that if you have both on same server you must change SIP port in one of them. On 10/30/06, Imran M Yousuf <[EMAIL PROTECTED]> wrote:
Hi Dear Users, I am new to Asterisk and had a query which is probably primitive. I wanted to know whether I can use the Digium Hardware and receive and establish connection to a host SIP Server which is totally a different platform. Let me explain - Usually there is a E1-VoIP gateway (independent Hardware) connecting to a Server/Client via LAN. In my case, SIP Server. Now what I want is that Digium PCI Hardware and the SIP Server will be the same PC and I Want the PCI Hardware to act as the gateway. Therefore my question in particular is: That is can I configure the device to talk to the Server in SIP protocol directly? -- Imran M Yousuf _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Com os melhores cumprimentos, Marco Mouta _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
