I am running 1.4.0-beta2
Date: Tue, 31 Oct 2006 10:57:06 -0600 (CST)
From: Anthony LaMantia <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Cisco 7960 Skinny calling SIP phone
To: Asterisk Users Mailing List - Non-Commercial Discussion
<[email protected]>
Message-ID:
<[EMAIL PROTECTED] >
Content-Type: text/plain; charset=utf-8
Which asterisk release are you running chan_skinny under?
----- Original Message -----
From: Will Roy < [EMAIL PROTECTED]>
To: [email protected]
Sent: Monday, October 30, 2006 7:52:01 PM GMT-0600 US/Central
Subject: [asterisk-users] Cisco 7960 Skinny calling SIP phone
Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny.
The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call.
When I debug Skinny on the console after the call has connected I see the following messag:
Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7]
What additional information would be required to troubleshoot this? or should I stop wasting time and just convert the phone to SIP? :)
regards
Wil
From: Anthony LaMantia <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Cisco 7960 Skinny calling SIP phone
To: Asterisk Users Mailing List - Non-Commercial Discussion
<[email protected]>
Message-ID:
<[EMAIL PROTECTED] >
Content-Type: text/plain; charset=utf-8
Which asterisk release are you running chan_skinny under?
----- Original Message -----
From: Will Roy < [EMAIL PROTECTED]>
To: [email protected]
Sent: Monday, October 30, 2006 7:52:01 PM GMT-0600 US/Central
Subject: [asterisk-users] Cisco 7960 Skinny calling SIP phone
Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny.
The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call.
When I debug Skinny on the console after the call has connected I see the following messag:
Recieved Alarm Message: DSP Keepalive Timeout [0x3, 0x10, 0x0, 0x7]
What additional information would be required to troubleshoot this? or should I stop wasting time and just convert the phone to SIP? :)
regards
Wil
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
