Hi Wendy,
I got this info from digium developers, that caller id name
transfer/display (asterisk/iphone <-> pbx/clasic phone)) using
ISDN/Q.SIG should work,
so, do you have possibility to confirm this, if it realy working in
practice (with siemens hipath idealy)? thanks
PJ
-------- Original Message --------
Subject: Re: [asterisk-dev] Zaptel/Asterisk - Q.SIG status
Date: Tue, 31 Oct 2006 09:54:05 -0600
From: Matthew Fredrickson <[EMAIL PROTECTED]>
Reply-To: Asterisk Developers Mailing List <[email protected]>
To: Asterisk Developers Mailing List <[email protected]>
References: <[EMAIL PROTECTED]>
On Oct 31, 2006, at 6:40 AM, Pavel Jezek wrote:
Hello developers,
because too litle info about what features are currently supported
with Q.SIG,
I would like to ask if "caller id name" supplementary service is
currently available, i.e.
if caller id name will be displayed on ip phone when calling from pbx
to asterisk (through PRI and Digium card) and vice versa
thank you
Yeah, I haven't tested it in a while, but it should work. Just make
sure you have in zapata.conf facilityenable=yes and switchtype=qsig.
Matthew Fredrickson
_______________________________________________
[EMAIL PROTECTED] wrote:
Hi,
we have tested the Digium-Cards, they work fine, but don't expect to
much!
Only segmentation 1 in Ecma (it is not a digium-problem)
The Name ist displayed, but only in Hex-Code (this is due to the
Libpri/Zaptel Drivers but I didn't fint a way to display it in *)
There is also very less documentation, on Asterisk.org (Features)
there is non Q.Sig Support offered.
Also very less documentation through google available.
;-(
If you find some hints, i'm also interested!
Regards wendy
----- Original Message ----- From: "Pavel Jezek" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, October 19, 2006 5:22 PM
Subject: [asterisk-users] siemens hipath interoperability - PRI/Q.SIG
- cardrecommendation
Hello, if somebody using this scenario in production successfully,
please send me info, which ISDN card for asterisk server is usefull
for me (Digium, Sangoma)?
my crucial requirement is "caller id name" transfer/display between
ISDN (Siemens PBX) and IP phone connected to asterisk
I'm using PRI interface and Q.SIG signaling.
thank you
PJ
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
