Jerry,
Do you
have it setup so that multiple phones answer one extension? I tried that
setup with two Cisco phones, however, only the quickest responding phone
answered. If you have a config that rings multiple phones and all of
the phones answer the same call, I'd be interested to see the config. I
guess theway to do it would be to setup a meetme conference and then dial all
parties into the conference then speak....
-sb
-----Original Message-----
From: Jerry Gibson [mailto:[EMAIL PROTECTED]
Sent: Friday, November 14, 2003 8:52 AM
To: [EMAIL PROTECTED]
Subject: RE: [Asterisk-Users] Overhead PagingWe do the same thing with the Snom phones. They can be set up for auto-answer, and they have a speaker jack in the back that is the same levels as a sound card on a PC. And the Snom phone automaticly hangs up when the caller hang up is detected (the SIP BYE message).Jerry-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bisker, Scott (7805)
Sent: Thursday, November 13, 2003 6:17 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [Asterisk-Users] Overhead PagingOur setup is to set the OSS device to autoanswer. The output of the soundcard feeds into a bank of overhead speakers. If the channel is in use, then the call gets put in a queue until the OSS device is free.-sb
-----Original Message-----
From: Johnson, Randy [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 13, 2003 5:34 PM
To: '[EMAIL PROTECTED]'
Subject: [Asterisk-Users] Overhead PagingDoes anyone have any recommendations for overhead paging systems for use with Asterisk?
Thanks,
Randy Johnson