Response inline.
Steve Totaro wrote:
I receive calls over a T1 with callerid and then *ani*dnis*. I am able
to strip out the ani and the dnis in the dialplan but when I try to set
the caller ID to be the ani, it looks ok but then if I do a NoOp
callerid on the next line, I get unknown.
Here is the section of my dialplan:
exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN})
exten => _*NXXNXXXXXX*NXXNXXXXXX*,2,Set(__ANI=${CUT(ANI,*,2)})
Why don't you just do that in one line?
exten => _*NXXNXXXXXX*NXXNXXXXXX*,3,Set(DNIS=${EXTEN})
exten => _*NXXNXXXXXX*NXXNXXXXXX*,4,Set(__DNIS=${CUT(EXTEN,*,3)})
And this?
exten => _*NXXNXXXXXX*NXXNXXXXXX*,5,SetVar(__TransferToExt=6101)
Use Set.
exten => _*NXXNXXXXXX*NXXNXXXXXX*,6,Set(__CALLERID(name)=${ANI})
exten => _*NXXNXXXXXX*NXXNXXXXXX*,7,Set(__CALLERID(number)=${ANI})
I'm not sure what would actually be getting set here. CALLERID() is a
function, not a variable (which you use the _s for).
Set(CALLERID(name)=${ANI})
Set(CALLERID(num)=${ANI)} num, not number.
exten => _*NXXNXXXXXX*NXXNXXXXXX*,8,NoOP(${CALLERID})
You need to do NoOp(${CALLERID(all)}) or CALLERID(num) or CALLERID(name)
or something. 'show function CALLERID'.
exten => _*NXXNXXXXXX*NXXNXXXXXX*,9,Goto(DNIS,${DNIS},1)
[DNIS]
exten => _NXXNXXXXXX,1,AGI(agi://172.16.1.135)
exten => _NXXNXXXXXX,2,Setvar(__ActiveCallID=${ActiveCallID})
Use Set instead of SetVar. You can probably get rid of this line anyway
by setting the variable in your AGI itself to __ActiveCallID.
exten => _NXXNXXXXXX,3,Goto(ext-queues,${TransferToExt},1)
exten => _NXXNXXXXXX,104,Goto(ext-queues,6004,1)
exten => h,1,DeadAGI(agi://172.16.1.135:4574)
Kevin
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
