You should run the 4ESS protocol ("a" on the Definity command "change DS1 board#) as the Definity may not send Display Name for the NI-2 protocol (settings "b" or "d")
Remember to make the Asterisk zapata settings consistent with the Definity.
On the Definity trunk group form Page 1, change "Codeset to send Display" to "0 (zero)", also make sure Outgoing Display is "y" . On Page 2, make sure Send Name and Send Calling Number are "y".
Setting Send UCID = "n" as well as Send Codeset 6/7LAI = "n", will clean up those Unknown IEs.
The Zaptel software only supports CodeSet 0 Information Elements so the Display Name has to be in Codeset 0.
Mark
> >
> !! < Unknown IE 1544 (len = 6)
>
> !! Unknown IE 8 (cs6, Unknown Information Element)
>
> Progress Description: Calling equipment is non-ISDN
>
> TON: International Number
>
>
>
>
>
> xxx*CLI>
>
> < [ 02 01 d4 d2 08 02 0a e6 05 04 03 90 90 a2 18 03 a1 83 8b 1e
> 02 81 83
> 70 05 91 34 33 38 39 96 08 04 d0 35 30 80 ]
>
> >
> !! < Unknown IE 1544 (len = 6)
>
> !! Unknown IE 8 (cs6, Unknown Information Element)
>
> Progress Description: Calling equipment is non-ISDN
>
> TON: International Number
>
>
>
>
>
> xxx*CLI>
>
> < [ 02 01 d4 d2 08 02 0a e6 05 04 03 90 90 a2 18 03 a1 83 8b 1e
> 02 81 83
> 70 05 91 34 33 38 39 96 08 04 d0 35 30 80 ]
>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
