Matt, > I've just finished updating my Asterisk to the CVS version. > Unfortunately, chan_zap won't load anymore. > > The hardware has not changed and the config files have not changed. I > can re-install the two packages back and forth. The old one will still > work. The new one won't. I tried updating to a brand-new zaptel and > wcfxo modules, with no difference. This has got to be the most > frustrating thing about dealing with Asterisk. This is also the same > error I get trying to get the FXS cards to work (I have never succeeded). > > There must be something else in the Makefile or configuration files. Is > there anything different regarding zap interfaces in the config files > since maybe 3 months ago?
I had the same problem the other day. Resolved it by essentially blowing away the existing src directories (rename them if you want) and doing a new cvs checkout. I know I seen someone post something a month or two ago relative to using a cvs flag to effectively over-write everything on the local system. Guess we're all supposed to be linux cvs experts. In my case, I was simply trying to do an update to asterisk (without zaptel, zapata, etc), and that didn't work since some constants were apparently defined in some non-asterisk header file (zaptel, I think, but I didn't bother to search it out) that were needed in one of the channels modules. Sounds like you've bumped against the same issue. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
