Hi,
I had this problem; when dialing to a Zap channel, it was "answered" as soon as the ZAP phone
started to ring. This is because I had callprogress=yes in zapata.conf. Whne I disabled it, it
fixed this problem. I hope this helps!
shadowym wrote:
Just to follow up on this,
After some testing tonight I found the following. Watching the Asterisk
CLI, when making a call from an extension to a ZAP channel the channel shows
as "answered" as soon as the zap line starts ringing. That would explain
why Followme was not working. It thought the PSTN line was answered
So the problem is that ALL outgoing PSTN calls are seen as "answered" as
soon as the Sangoma card rings a zap channel. Not the first Asterisk
generated ring but the second ring right when you hear it switch over to the
PSTN line. Is there a trick to prevent this? I messed around with "wink"
and "debounce" settings in zapata.conf but that didn't seem to make a
difference.
-----Original Message-----
From: shadowym [mailto:[EMAIL PROTECTED]
Sent: Monday, November 06, 2006 1:06 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Follow Me problems
Hi all,
I have a production system up and running for a little over a week now. So
far it has exceeded my wildest expections. No problems whatsoever running
what I consider a fairly complicated dialplan using many advanced features.
6 extensions and averaging about 50 calls a day.
Today we appear to have discovered our first bug. We have an extension
setup to "followme" by ringing that extension + an external cell #
(ringall). If nobody answers after 20 seconds the "destination if no
answer" is set to go to the extensions voicemail in the "followme" module.
The problem is it just keeps ringing forever. If we delete the followme it
forwards to the voicemail as per the default SIP extension configuration
with voicemail enabled.
Anyone run into this? Is there a workaround? Any advice would be greatly
appreciated as always.
Our configuration is:
Supermicro Pentium D 2.66 Server with 2x512MB Memory 3ware 8006-2LP Hardware
RAID 1 Sangoma A200D with 8fxo (latest firmware/drivers as of last week)
CentOS 4.4 Asterisk 1.2.13 Zaptel 1.2.10 FreePBX 2.1.3
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
thanks,
yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
