I'm trying to generate a Recall/Flash on an FXO (TDM400) connected to a PABX and failing at the moment. I was using the Flash
application, which seems to generate a hook flash as opposed to a Recall. Debugging the Zap channel output using a second FXS channel gives me the following
<< [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1]
<< [ TYPE: DTMF (1) SUBCLASS: 1 (49) ] [Zap/1-1]
when I press Recall on the type of phone I'm trying to mimic and
<< [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1]
<< [ TYPE: Control (4) SUBCLASS: Flash (9) ] [Zap/1-1]
when I use the Flash application.
I have 3 questions which I'd greatly appreciate answers to
1) Is it possible to generate the
<< [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1]
only using a Zap channel?
2) If it is, is there an easy way to do this, or do I have to delve into zaptel / asterisk code?
3) If I have to delve into asterisk code, which areas should I be looking at? As a newbie to the whole zaptel architecture and
asterisk code base who is on a rather tight schedule if I have to go this route then any pointers as to where I should be looking
and what I should be doing would be hugely appreciated
I've searched high and low and can't seem to find answers to any of these questions.
Thanks
Dululu
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
