You'll probably need clean builds of zaptel and asterisk - I tried with updates earlier today and the echotraining option wasn't recognised until I did a complete clean install.
Iain
--On Saturday, November 15, 2003 13:59:13 -0800 Andrew Gillham <[EMAIL PROTECTED]> wrote:
Andrew Joakimsen wrote:
The X100P cards have horrible echo problems. I've heard talk about this being fixed, but havent seen anything done about it.
one-----Original Message----- From: [EMAIL PROTECTED] [mailto:asterisk-users- [EMAIL PROTECTED] On Behalf Of Larry D. Black Sent: Saturday, November 15, 2003 3:55 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Bad echo on outgoing calls
I have just installed and configured asterisk I have been playing with software phones and an analog phone plugged into a TDM card. I have
line coming in on a X100P card.
My X100P works quite well if I don't adjust the gain. Unfortunately it is a bit on the quiet side without the adjustment.
I'll test it out with the echotraining and the gain settings. In the past with gain enabled, the echo would correct after 5-10 seconds of conversation.
This is with MEC2, and I tested with and without the aggressive suppressor.
-Andrew
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
