based on below, you have them in the same context insert a context=foo line after channel =>1
if you want channel 2 in a different context On Sun, Nov 16, 2003 at 09:32:42PM +0200, Dan wrote: > Hi, > > I have two X100P cards in the same system. > I can use both of them to initiate and/or receive PSTN calls. > > I want now to define separate context for each of them, in oder to route > inbound calls to different extensions. > > This is what I have now in zapata.conf file: > > [channels] > language=en > context=inbound-analog > signalling=fxs_ks > usecallerid=yes > callwaiting=yes > echocancel=yes > echocancelwhenbridged=yes > busydetect=yes > busycount=10 > callerid=asreceived > rxgain=10 > txgain=15 > channel => 1 > channel => 2 > > > What I must do to separate the two? > Let's say: > ZAP/1 in context 'in-number1' > ZAP/2 in context 'in-number2' > > Thanks, > Dan > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
