On Sun, 2003-11-16 at 19:50, Jeremy McNamara wrote: > I've got dozens of X100P based systems and have only had echo trouble on > 4 systems. All of them were solved by tweaking the various settings in > the Zaptel Makefile and in zapata.conf or calling the telco and > bitching, loudly.
Earlier this evening I did a complete Checkout of Zaptel and therefore put the makefile to default, afterwards I had terrific echo. With the following settings there is no echo for me on a France Telecom line with X100P to a Grandstream. # Pick your echo canceller: MARK2, MARK3, STEVE, or STEVE2 :) # #KFLAGS+=-DECHO_CAN_STEVE #KFLAGS+=-DECHO_CAN_STEVE2 #KFLAGS+=-DECHO_CAN_MARK KFLAGS+=-DECHO_CAN_MARK2 #KFLAGS+=-DECHO_CAN_MARK3 # # Uncomment for aggressive residual echo supression under # MARK2 echo canceller # KFLAGS+=-DAGGRESSIVE_SUPPRESSOR zapata.conf is rxgain = 0.0 txgain = 0.0 Hope this helps someone. -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users