Ok, now it works:
ideiafix:~# modprobe zaptel
ideiafix:~# modprobe wcte11xp
ZT_CHANCONFIG failed on channel 32: No such device or address (6)
FATAL: Error running install command for wcte11xp
ideiafix:~# modprobe wctdm
ideiafix:~# modprobe wcte11xp
Order to load: zaptel, wctdm, wcte11xp
Thanks a lot Henk !
----- Original Message -----
From: "Henk Dick" <[EMAIL PROTECTED]>
To: "'Lincoln Zuljewic Silva'" <[EMAIL PROTECTED]>; "'Asterisk Users
Mailing List - Non-Commercial Discussion'" <[email protected]>
Sent: Wednesday, November 22, 2006 5:03 PM
Subject: RE: [asterisk-users] TE110P and TDM400P
I would suggest the following
- remove the drivers
- load them manually (zaptel, wcte11xp, wctdm)
Run:
Zttools -> should show unconfigured cards.
Take:
/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
fxsks=32-35
loadzone = us
defaultzone=us
run:
ztcfg -vv
See what it is saying
Hope this helps
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
