Noc Phibee wrote:
thanks for this information, but no change:
Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4:
No such device or address
Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No
such device or address
here = 0, tmp->channel = 4, channel = 4
Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to register channel '4'
Nov 24 10:32:42 WARNING[6346] loader.c: chan_zap.so: load_module
failed, returning -1
Nov 24 10:32:42 WARNING[6346] loader.c: Loading module chan_zap.so
failed!
Hi,
Check your /etc/zaptel.conf and ensure that it has the right kind of
signalling set for the same channel number as that in you zapata.conf.
do : cat /proc/zaptel/1
and it should show channels and the effective signalling settings for them.
If signalling does not appear here,it means that, it is not configured
properly,
and loading chan_zap would fail.
My first and fourth channels are configured as fxsks and the output i
get is :
#cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
1 WCTDM/0/0 FXSKS
2 WCTDM/0/1
3 WCTDM/0/2
4 WCTDM/0/3 FXSKS
HTH :)
Regards,
Pranav
--------------------------------------------------------------------------
Blessed are the pessimists, for they take backups !!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
