where is the "calling" button?
I do not have it. I just can call typing numbers. The manual says that I
should press "#" at the end of the number, but it does not work
----- Original Message -----
From: "Brett Crapser" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Saturday, November 25, 2006 5:13 PM
Subject: Re: [asterisk-users] dialing with different speed
On Saturday 25 November 2006 09:38 am, Androtech wrote:
Hi all,
I have a VOIP phone with the PA1688 chip; my firmware is V1.42.028.
This IP phone is registered in an Asterisk PBX and I've a problem when I
dialing internal number. If I dial an internal number, like for example
102, the IP phone takes 35 seconds to send the number to Asterisk
Rather look to your phone settings. I have a AT-320.
Or better dial your local number and hit the 'call' button which bypasses
the
internal dial plan of the phone and dials the number.
Also - the current version for PA1688 is something like 1.55.XXX
Brett
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
